This article guides you through managing agreements within the system, covering how to create, view, edit, and move them. You'll also find details about the various data fields and associated tabs. |
From the left-hand navigational menu, make sure you have selected the correct fiscal year.
Folder: Select a folder in the left-hand navigation. Locate and select a specific agreement from the list.
Navigate to a project and select the Agreements tab. Click the view or edit link next to your specific agreement.
Navigate to a project using the left-hand navigational tree menu. Click on the (+) sign next to that project. The menu will expand to display associated agreements. Click on the appropriate agreement to view or edit it.
Basic Information - Complete the required fields, and optional fields as needed:
Formal Title (optional): Enter the official spend plan title the government uses. This title should not be the same as the short title.
Field ID (not editable): This displays the unique identification number from the field system. It only appears if the system cross-walked the agreement.
Short Title (annual) (optional): Enter a brief title that managers use to refer to the agreement.
Description (optional): Describe the purpose and technical objective of the agreement.
Major FY Activities (annual) (optional): List the significant activities scheduled for the selected fiscal year for this agreement.
AOP Short Description (annual) (optional): Enter an agreement description to use in place of the long description in the program’s Annual Operating Plan.
Technology Manager (annual) (required): Select the appropriate technology manager from the list of options.
AFP Recipient (required): Select the appropriate office. Selecting an AFP Recipient will clear any information in the Prime Awardee and Prime Awardee Contact fields.
Prime Awardee (annual) (required): Click the ellipses to open a pop-up with a dropdown menu listing available choices. Select an awardee from the alphabetical index (selecting a letter or number range will reload the dropdown with relevant awardees) and click OK.
Prime Awardee Contact (annual) (optional): Click the ellipses to bring up a pop-up with a dropdown menu listing available choices. Select a prime awardee contact from the dropdown menu and click OK.
Additional Contacts (annual) (optional): Repeat the same process as above to select other contacts for this agreement.
Award Type (required): If the selected agreement falls within an SBIR/STTR project, the award type will automatically default to Grant – SBIR/STTR. If you check either the international or interagency checkboxes on the agreement, the award type will default to Contract and you will not be able to edit the field. When the field is editable, you can select a different award type by clicking the down arrow to display the dropdown menu of available award types for the agreement. Click the Description link to open a popup that lists all available award types and their definitions.
Award Category (not editable): The Award Category automatically populates once you select the Award Type.
Congressionally Directed Activity (Annual)? (optional):Check this box if the agreement is for an earmark.
Competitive (Annual)? (optional): Check this box to indicate if the agreement is competitively bid.
International Agreement? (optional): Check this box to indicate if the agreement is international. If you check this box, the award type will default to Contract.
Interagency Agreement? (optional): Check this box to indicate if the agreement is interagency. If you check this box, the award type will default to Contract.
FWP Number (Annual) (optional): Enter the Field Work Proposal Number assigned to the task. If you select a National Laboratory as the AFP Recipient, you must fill in either this field or the AOP Number field.
Agreement Type (optional): Click the down arrow to display the drop-down menu of agreement types for the agreement.
Status (required): Click the down arrow to display the drop-down menu of status options.
Planned Start Date (required): If the agreement belongs to a project that has a start date after the agreement creation date, the default agreement start date will match the project start date. If the agreement belongs to a project that has a start date before the agreement creation date, the default agreement start date will be the day you create the agreement. To change the date, click the ellipses to select the start date of the agreement. When entering the agreement start date, the new date must not be:
Later than the month and fiscal year on any of the agreement’s funding actions.
Later than the month and fiscal year on any of the agreement’s cost and obligation data.
Earlier than its project start date.
Later than any of its agreement-level milestones’ planned completion dates.
Later than any of its subcontracts’ start dates.
Later than the agreement planned completion date.
Later than the agreement award start date.
Planned Completion Date (required): If the agreement belongs to a project with a completion date before the last day of the selected fiscal year, the default agreement completion date will match the project completion date. If the agreement belongs to a project with a completion date after the last day of the selected fiscal year, the default agreement completion date will be the last day of the selected fiscal year. To change the date, click the ellipses to select the completion date of the agreement. The completion date must be later than the start date. When entering the agreement completion date, the new date must not be:
Earlier than the month and fiscal year of any funding actions written or planned to that agreement.
Earlier than the month and fiscal year of any of the agreement’s cost and obligation data.
Earlier than the planned completion date of its agreement-level milestones.
Later than its project completion date.
Earlier than any of its subcontracts’ completion dates.
Earlier than the agreement’s planned start date.
Earlier than the Award End Date.
Award Start Date (optional): This is the date the award begins. For PMC agreements, the system automatically updates this field and cannot be edited. For non-PMC agreements, this is an optional field, and the date must fall within the agreement’s planned start/completion dates.
Award Completion Date (optional): This is the date the award ends. For PMC agreements, the system automatically updates this field and cannot be edited. For non-PMC agreements, this is an optional field, and the date must fall within the agreement’s planned start/completion dates.
ARRA Project Code (optional): This field only appears if the agreement is located under the Recovery Act folder. Enter the recovery act project code here.
Reset: Click this button to refresh the form with the original information, which will discard any unsaved information.
Update Current Year: When you finish editing the agreement information, click this button to save your changes. If the agreement start and completion dates are not in the fiscal year currently selected in the left menu, you will no longer see this agreement in the left menu after saving.
Funding Authorizations - Displays funding authorization information, which varies based on your access level.
Total Contract Value (optional): Enter the total amount of the contract for the life of the agreement. This value does not include the total cost share value.
Total Cost Share Value (optional): Enter the total amount of cost share for the life of the agreement. This value does not include the DOE Share.
Mortgage/Out-Year Planning Data (optional): Enter the out-year planning values by clicking the Edit link for a specific fiscal year and entering the value. To save your changes to the mortgage data, click Accept for the selected fiscal year row.
Authorized Program Guidance: Approved program guidance on the current agreement by funding action. Any users with permission to view approved program guidance letters can access this table.
Planned Program Guidance: Guidance with a status of either 'In Process' or 'Prepared' will appear in the lower table titled Planned Program Guidance. Any users with permission to view funding actions that have not yet been approved in a guidance letter can access this table.
View Agreement Fund Transfers: Deselect this checkbox to hide rows from the Authorized Program Guidance table for any field/fund transfers associated with this agreement.
Show Adjusted Totals Including Solicitation Award Values: Deselect this checkbox to remove rows from the Authorized Program Guidance table for any solicitations awarded to this agreement.
View All Years: Select to view all planned and authorized program guidance over the life of the agreement.
Costs & Obligations - Contains your agreement’s cost and obligation calculations by B&R Code.
Cost Source (not editable): The source of the cost and obligation data from an external system. If your agreement receives cost data from STARS, the preceding month’s IDW data will not include cost accruals until the system makes the month-end data available in the IDW.
Last Update Date (not editable): The most recent date that the external source identified in the cost source field updated the cost & obligation data. When these two fields do not display, the agreement will accept manual data entries.
Edit: Click the appropriate month to edit existing comments or enter a new comment.
Additional Comment (optional): You may enter comments in this field if you feel additional information is necessary in the monthly submission. Note that you cannot edit this field for agreements updated through the upload lab financials process.
PMC Reviewer Comment (optional): The PMC will populate this field in CPS. Any comments the PMC submits will be incorporated into the CMEI Monthly Report for review by the HQ Program Managers. You can only edit the PMC comment for the current reporting month until the 15th of the current month. For example, you can edit the Nov PMC Comment field until Dec 15th.
Click Accept to save your changes or cancel to not apply your changes.
Milestones - View, edit, or create technical milestones for the selected agreement. Click the Add New Milestone button and complete the fields on the form.
Subcontractors - Lists the Prime and Sub Awardees and the amount of funding approved for each awardee.
Edit: Click Edit in the row of that subcontractor on the list of subcontractors on the main subcontractor page.
Documents - View or attach documents to the selected agreement.
Solicitations - Display a list of Solicitations that have awarded funds to the selected agreement.
|
In the Left-Hand navigational menu, select and hold the agreement you wish to move.
Drag the pointer to the project that should contain the agreement and drop it on the desired project.
You will receive a confirmation message that verifies your request to move the agreement.
Q: Why can't I edit certain fields in my agreement?
A: If your agreement originated from a field system (external source), some fields are intentionally locked to maintain data integrity with the originating system. This also applies to associated milestones. If you believe there's an error or need an exception, please contact support.
Q: I updated my agreement, but it's no longer visible in the left menu. What happened?
A: If the agreement's planned start and completion dates fall outside of the fiscal year you currently have selected in the left menu, the system will no longer display it in that specific view. To see the agreement, navigate to the correct fiscal year using the left menu's FY dropdown, or use the "View All Years" option in relevant sections if available.
Q: How can I apply changes to an agreement across multiple fiscal years at once?
A: If your agreement is active across several fiscal years, go to the "Basic Information Tab" and click Show Multiple Year Update Options. This will reveal a section where you can select specific annual data fields and the fiscal years you want to update. After making your selections, click Update Multiple Years to apply the changes comprehensively.
Q: I need to add a Prime Awardee or Contact that isn't in the system. How do I do that?
A: In the "Basic Information Tab," if you're selecting a Prime Awardee or Prime Awardee Contact and don't see the desired option, look for an Add New button within the selection pop-up. Clicking this will allow you to create a new organization or contact, respectively.
Related articles appear here based on the labels you select. Click to edit the macro and add or change labels.
|